After-sales Service: | All The Time |
---|---|
Warranty: | 1 Year |
Mixer Type: | Agitator |
Samples: |
tank
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Stainless steel storage tank , is a clean storage equipment to keep material liquid in different applications.
We have lots of different tanks for application: storage tank, mixing tank, fermentation tank, emulsifer tank . So different functions can be available, mixing, blending, dissolving, heating, cooling, circulation.Type: Vertical, Horizontal | Accessories | |
Layer: Single layer, double layer | ||
Jacket: dimple jacket, coil tube, full jacket. | Manhole coverr | Level meter |
Jacket can pass steam (or hot water), also can pass the cooling water | CIP Cleaning ball | Level gauge |
Temperature insulation: with temperature insulation or without temperature insulation | Rebreather | temperaturegauge |
Isolation material: rock wool(120-220c), PU foam(Max 120C), Pearl powder(min. 220C), | Thermometer | Safety valve |
Motor: Chinese brand, European brand, etc | Lader | Blender |
Motor speed: fixed or adjustable | .... | |
Motor place: bottom magnetic agitator, side agitator, top agitator. | ||
Thickness: 3mm at least(it is according to the requirement) | ||
Working pressure: normal pressure or pressured(Offer Chinese Pressure Vessel Certificate) | ||
Working temperature: -4 to +150 ºC | ||
Connection: tri-clamp, SMS union, flange, etc | ||
Finish: Sanitary finish, without dead angles. |
Size | 5L-50000L |
Jacket quantity | 1-4 jackets |
Mixing power | 0.12KW-22KW |
Mixing type | Paddle type,Anchor type, Push type, Auger-type,Turbine type |
HOW DO WE MAKE THE QUALITY CONTROL | |
For Raw Materials |
1. Material control from raw materials. For raw material checking, we check 100% by chemical liquid. Any property mistakes would be rejected. 2. Sand hole inspection after raw materials are machining before polishing. 3. Carbon component report can be provided if needed 4. Mechanics test report can be provided if needed |
For New products | 5. 2nos of new samples to be checked against technical drawing. Testing report is provided to customers before bulk production. |
For finished materials |
6. For valves, pressure testing and temperature testing is required for each valve. 7. After we get the finished products, we check for surface roughness, thickness equality, roundness, size measurement and sand holes again. 8. For all finished products, the checking quantity is not less than 10% of total quantity. 9. Before shipment, we check for the quantity of each product in order to find out any missing quantity or wrong product. |
Suppliers with verified business licenses